After the official release of a distribution, the developers continue to iron out bugs with various patches, and they continue to minimize security vulnerabilities during the entire support period of the operating system. Ubuntu 14.10, for example, will be supported for the next 9 months. If you install the distribution a few weeks after its official release, updates are already available.

To look for updates, call up the Software Updater program (Figure 1), which displays a list of installable patches. Clicking Install Now downloads the patches onto your computer (Figure 2). Restart the system to apply the patches. If no updates are available, you will see The software on this computer is up to date (Figure 3).

Figure 1: If Ubuntu updates are out there, you'll find out by invoking the "Software Updater" program.

Figure 2: Ubuntu shows details on what updates are waiting in the queue.

Figure 3: No updates are needed and you are good to go.

Bug fixes help keep your system safe and secure. With a few exceptions, such as Firefox and Thunderbird, newer versions of installed programs are updated with the next Ubuntu version. Within the support cycle of Ubuntu 14.10, only Backports and PPAs [1] can be applied to a new version. Backports are special repositories that provide newer versions of some software [2].

Chicken and Egg

To get updates for Ubuntu 14.10, you must have access to the Internet. The NetworkManager helps you set up that access during the installation. If you're not cabled in, the installer presents a window listing the nearby wireless networks and asks you to connect to one, which is when installation begins in earnest. To bypass this step, install Ubuntu without Internet access, and then later set it up through the NetworkManager, which is represented by a small icon at the top right of the screen. If you're using a wireless card, you will see a wave-shaped icon and, if the system is connected, the icon reflects the quality of the connection. Since Ubuntu 12.10, connecting to the Internet even before signing onto the desktop is possible.

Wireless Problems

Not all wireless cards work flawlessly with Ubuntu. Before you install Ubuntu on your computer, use the Live version to test whether Ubuntu recognizes your wireless chip. Boot into Live mode and try to connect to one of the wireless networks displayed. If connecting fails or no access points are showing, check the hardware switch on the computer itself.

If you run into problems configuring wireless cards, DSL modems, or UMTS sticks because NetworkManager doesn't recognize them, temporarily connecting the computer with a network cable to a switch or router usually works.

Hardware is a frequent source of wireless problems. On many notebooks, a button turns on the wireless card, whereas on others, a special key combination (e.g., Fn+F5) or a single F keystroke works. Test to see whether the WLAN has been deactivated by mistake. To enable access for DSL, UMTS, and so on, click in the upper right on the NetworkManager icon and choose Edit connections . Through Connection Information (Figure 4), you can find out whether the access point provided you with an address via Dynamic Host Configuration Protocol (DHCP). DHCP is the service that automatically assigns you an IP address in the local net. Most routers provide DHCP addresses by default.

Figure 4: Connection Information provides some helpful connectivity facts.

Ethernet

Wireless routers usually have inputs for network cables. If the router assigns IP addresses with DHCP, which it usually does, NetworkManager automatically connects after you plug in the network cable. Rarely does this not work, but if that is the case, you must assign an IP address and domain name manually.

Wireless Networks

For Ubuntu to set up your wireless card properly, the kernel needs to find a suitable driver for the card. Then, it's as easy as clicking the NetworkManager to obtain the neighboring networks (Figure 5).

Figure 5: NetworkManager displays the neighboring access points, which is generally the first choice when accessing the Internet..

Select the name of the wireless network and log in with your passcode. To avoid mistyping the password, make the password visible. Ubuntu automatically detects the encryption type (WEP or WPA) that the access point uses. After a successful network authentication, your wireless card provides you a valid IP address via DHCP.

Setting up your smartphone (Android or iPhone) as an access point, which is called tethering , also works. NetworkManager treats the tethered smartphone as a normal access point and connects to it. Smartphones use the Universal Mobile Telecommunications System (UMTS) to get to the Internet, which is a good solution when you are on the move. Remember, however, to secure the access point on your mobile phone with a good password and deactivate it when you are done.

If the kernel doesn't provide a driver for your wireless card, a proprietary driver is usually available. To test this, press the Windows key and open the Software Repositories program.

If the Additional Drivers tab lists the driver for your card, click Activate so that the wizard can download the corresponding software for the card.

If both steps don't work, search online for Ubuntu 14.10 {YOUR WIRELESS CHIP} . To find out what your built-in wireless chip is called, press Ctrl+Alt+T to open a terminal and enter:

$ lspci | grep "Network"

For a USB device, use the following command to find the chip's ID number:

$ lsusb

An Ubuntu help page [3] lists the wireless card and its degree of support in Ubuntu and its derivatives. Setting up an unsupported wireless card can be complicated on occasion, and other times a simple shell command can activate a card. In some situations, programs such as Ndiswrapper allow use of the card's Windows driver with Ubuntu [4].

UMTS Cards and DSL Modems

Using NetworkManager, you can also set up UMTS cards and chips, as well as DSL modems. Of course, the system must recognize the hardware; otherwise, the tabs are grayed out. Once Ubuntu identifies a UMTS card, insert the card into the USB slot, enter the PIN, and configure it using NetworkManager.

DSL modems are also candidates for NetworkManager. Click Edit Connections and choose Add on the DSL tab. Then, connect the DSL modem to the phone jack and your computer via cable to the modem and apply the access credentials from your Internet service provider. These will go on the DSL dialog.

Usually you will find a long line of text among the data, including the @ character. The part before the @ is your username , and the part after it is the service name . Then, enter the passcode and change to the Wired tab, where you enter the MAC address of your network card connected to your DSL modem. The name is usually eth0 . After you determine the address, open a terminal and enter:

$ /sbin/ifconfig | grep Hardware

The MAC address consists of six two-character sections separated by colons. Enter the MAC address in the field for the DSL configuration.

VPN Connections

If you want to surf securely on the Internet through a tunnel, use a virtual private network (VPN) solution, such as OpenVPN, which NetworkManager also supports. Details on OpenVPN and how it works with Ubuntu are in an article in Ubuntu User issue 13, page 58-59.

Troubleshooting

If the DSL or UMTS modem is still giving you problems despite the correct driver, NetworkManager may have a bug. One solution is to install a recent version of the software by integrating a PPA. This package often provides a newer version than the one normally used by Ubuntu. Often you can solve network problems by importing all updates for your release and restarting the computer.