Controlling digital SLR cameras with gPhoto2

The powerful gPhoto2 command-line software allows direct control of DSLR cameras from a PC, enabling automated continuous shooting. You can also use it for recording time-lapse videos on microscopes and telescopes watching the night sky.

GPhoto2 accesses the camera through the libgphoto library with a USB connection. Whether installing gPhoto is worthwhile depends on the kind of camera you have. The gPhoto homepage [1] lists over 1,600 supported models, but this means only that the program can read the image memory. For more demanding tasks, such as the remote control functions described below, support is essentially limited to Canon and Nikon DSLRs.

GPhoto2 can be found in the repositories of all the major distributions and can, therefore, be easily set up with the corresponding package manager. Under Ubuntu and its derivatives, choose the gphoto2 package and install it with the Apply button.

Connect the camera with a USB cable to the PC and turn it on. This usually opens a file manager window on the screen that shows the contents of the camera's memory card. Unfortunately, this prevents gPhoto2 from having exclusive access to the camera such that the program balks at it. Therefore, before you can work with gPhoto2, you have to unmount the camera's memory card. In Ubuntu, you can do this in Nautilus by right-clicking the memory card icon and selecting Unmount from the context menu (Figure 1). After this preparatory work, the camera is available exclusively to gPhoto2.

Figure 1: The context menu of the camera memory card lets you unmount the card so that gPhoto2 can have exclusive access to the camera.

Taking Pictures

For your first photo, open a terminal window and change to the directory where you want gPhoto2 to store it. Then, enter the following command:

$ gphoto2 -I 2 -F 2 --capture-image-and-download

The -I parameter sets the time interval in seconds until the next shot. The -F option sets the number of frames. This example therefore takes two photos every two seconds. The --capture-image-and-download statement completes the action and ensures that gPhoto2 stores the image in the target directory. You can find a complete list of parameters in Table 1.

When executing a command, gPhoto2 uses the current camera settings. This can be a blessing as well as a curse. If you turned on autofocus, for example, the camera won't manage to focus clearly, and the photos will be blurry. If you use gPhoto2 for astronomical recordings and connecting remotely from the comfort of your living room, you may not know that the camera is trying in vain to focus, and your whole photo shoot can turn into a wasted night.

Hence, you should avoid any automatization (exposure time, aperture, focus) with gPhoto2 and take shots manually. With a command executed properly, you get a rundown of the events in the terminal window (Figure 2).

Figure 2: GPhoto2 logs the actions you execute.

However, it's not always clear that your camera is actually performing these tasks. If your camera is not one of the supported ones listed on the gPhoto2 homepage, you may have a lot of trial and error. Particularly well supported are the DSLR cameras from Canon and Nikon [2]. The author's Olympus E410 DSLR wasn't supported for capturing, but gPhoto2 could read the images.

Multiple Cameras

If you connect more than one camera to the PC, you can control them independently from gPhoto2. The gphoto2 --auto-detect command provides a list of the detected cameras. You can use the displayed name to control the camera with:

$ gphoto2 --camera="displayed_name"  --capture-image-and-download

If you open a separate terminal window for each camera and record the image in separate directories, you can get a parallel series of frames from each camera. Figure 3 shows the process.

Figure 3: GPhoto2 recognizes a Olympus 500 and a Nikon D5100. By opening each in a separate window with two different image directories, you can capture images with the same name that gPhoto can then delete.